Uusimmat viitteet

  • Design and Construction of Railway Shelter 

    Edebor, Wilson (Hämeen ammattikorkeakoulu, 2017)
    This thesis is about the design and construction of a railway shelter for Iittala Asema with indigenes specialized in painting of art works. This design was to be driven by the relationship between the bus shelter, the ...
  • Standard test part for tensile test 

    Igunnuoda, Olorunmuyiwa (Hämeen ammattikorkeakoulu, 2017)
    The goal of this thesis was to make standard test parts for tensile test as the topic suggests. The task included among other things creating NC-programs which would be used in the manufacture of these parts on a CNC ...
  • Self-study manual for introduction to computational fluid dynamics 

    Nabatov, Andrey (Hämeen ammattikorkeakoulu, 2017)
    Computational Fluid Dynamics (CFD) is the branch of Fluid Mechanics and Computational Physics that plays a decent role in modern Mechanical Engineering Design process due to such advantages as relatively low cost of ...
  • Production optimization in a hydraulic cylinder workshop 

    Nekrasevits, Andrei (Hämeen ammattikorkeakoulu, 2017)
    Belautozap is a company located in Belarus that designs and manufactures hydraulic cylinders. Not until a while ago they were struggling after having made some wrong investments where their production took a toll. Now ...
  • Commissioning a Fatigue Testing Unit 

    Dementyev, Nikita (Hämeen ammattikorkeakoulu, 2017)
    Fatigue testing is a crucial aspect in the process of the engineering design. To acquire the information on the fatigue strength and life, testing equipment have been developed. With the help of such devices, the data on ...
  • Design to replace electric motors with mechanical springs in a climbstation 

    Rai, Bikal (Hämeen ammattikorkeakoulu, 2017)
    Joyride Games Oy wanted to explore the possibility to use mechanical springs as a replacement to electric motor currently driving their device i.e. a climbstation. I was commissioned to do a research and development work ...
  • A new method to evaluate the stress concentration factor of a plate with drilled holes 

    Kasjanovs, Sergejs (Hämeen ammattikorkeakoulu, 2017)
    The thesis introduces a new method of estimating the stress concentration factor in a plate with two or three drilled holes. It is known, that stress concentrations are one of the biggest problems to avoid when designing ...
  • Topology optimization of 2D structures 

    Yakovlev, Valeriy (Hämeen ammattikorkeakoulu, 2017)
    The objective of this thesis was to implement an algorithm for topology optimization of 2-dimensional elastic structures subjected to multiple cases of loading. For this purpose, a computer program in Python was written. ...
  • Planning a hydraulic hoist on a car trailer 

    Awal, Gyan (Hämeen ammattikorkeakoulu, 2016)
    The objective of this project was to design a hydraulic hoist for a car trailer to lift a mass up to 500 kg by using 12 volts of direct current. The thesis project, commissioned by HAMK University of Applied Sciences, was ...
  • A Handbook for 3D Create 

    Pandey, Krishna (Hämeen ammattikorkeakoulu, 2016)
    The purpose of this thesis work was to create a handbook for 3D Create. This handbook was prepared for the use of students at HAMK University of Applied Sciences. Any beginners with 3D Create can also use it. This thesis ...
  • 3D microstructure modelling of coating layers including grain boundaries 

    Yashchuk, Ivan (Hämeen ammattikorkeakoulu, 2016)
    Nowadays, coatings have a significant role in increasing the lifetime of manufactured products. A coating layer applied to the surface of a product increases its corrosion and wear resistance. As with any other materials, ...
  • Design of an Automated Sheet Metal Transfer System for Die Hardening 

    Niraula, Abinab (Hämeen ammattikorkeakoulu, 2016)
    The purpose of this thesis was to design an automated facility that transfers a heated sheet metal specimen from the oven to a press hardening die, assembled in a hydraulic press. This project was commissioned by Sheet ...
  • Smart Biowaste Machine 

    Li, Yijie (Hämeen ammattikorkeakoulu, 2015)
    The background for this thesis is mechanical design related to biowaste machine design and product development process. This machine should be able to pack food waste nicely for biogas generation. The topic was reuse of ...
  • Design of a Transition Resistance Measurement System 

    Sotu, Onome (Hämeen ammattikorkeakoulu, 2015)
    ABSTRACT The method described in the SFS-ISO 18594 Standard was implemented to design a transition resistance measurement system. Ohutlevykeskus, a partner of HAMK University of Applied Sciences and specialized in ...
  • Comparison of some FEM codes in static analysis 

    Neupane, Dilip (Hämeen ammattikorkeakoulu, 2014)
    The aim of this thesis work was to compare some finite element method codes and their theories in a static analysis with few different examples. The comparison was made between open source and commercial FEM codes. This ...

Näytä lisää